Label threading
USER MANUAL FOR BLITZ PRICE MACHINES
1. OPENING THE COVER - BOTTOM PANEL:
Open the bottom panel by pulling the side buttons back. Then open the tape holder cover by pulling it lightly upwards.
2. LOADING LABEL ROLL:
Unwind about 20 cm of the tape and slide it through the visible opening. Lower the roll into the holder and close the lid.
3. CLOSING THE BOTTOM PANEL:
Leave about 15 cm of the tape hanging out and close the bottom.
4. TAPE THREADING:
The tape end is inserted between the smooth and toothed rollers, while simultaneously pressing the handle several times until the first printed label appears at the rubber roller.
5. VALUE SETTING:
By pulling the knob to the right, we set the indicator arrow to the desired position, then turn the knob forward or backward until the desired number appears. After setting the numbers, we push the adjustment shaft back with the knob.
6. REPLACING THE INK ROLLER:
Open the front cover by pressing lightly on the side. Use the auxiliary fork to lift out the old cylinder, then place the new one in the fork and fit it into place.
7. LABEL PRINTING REGULATION
To adjust the position of the imprint on the label, there is a screw on the bottom plate. The adjustment can be made by loosening the screw. The screw is then tightened.